Neonatal Pulse Oximeter
We use cookies to Improve your online experience. By continuing browsing this website, we assume you agree our use of cookies.
Home > Pediatric Pulse Oximeter Buying Guide

Pediatric Pulse Oximeter Buying Guide

Neonatal Pulse Oximeter

Pediatric Pulse Oximeter Buying Guide

Sizing a neonatal pulse oximeter around a small newborn is a different job from buying an infant pulse oximeter for a one-year-old, and the BM1000A handheld is built to work across both bands with three SpO2 sensor options. Below, its verified specifications — detection ranges, accuracy, probe choices, battery and app data — are turned into one practical purchase decision.

Neonate BM1000A Portable Pulse Oximeter with Bluetooth and Health Monitoring App Integration for Pediatric Children
Neonate BM1000A Portable Pulse Oximeter with Bluetooth and Health Monitoring App Integration for Pediatric Children

BM1000A handheld with three optional SpO2 sensor types for neonates, children and adults.

BM1000A Specifications, Verified

Every figure below comes from the BM1000A product page. Read the accuracy rows closely: they define the range where the ±2% claim actually applies.

BM1000A handheld pulse oximeter
ParameterVerified value
Parameters monitoredSpO2, pulse rate (PR) and perfusion index (PI)
SpO2 detection scope30%–100%
SpO2 accuracy±2% from 80% to 100%
Pulse rate detection scope25–350 bpm
Pulse rate accuracy / resolution±2 bpm / 1 bpm
SpO2 sensorsThree sensor options available
Connectivity & appBluetooth to PC or smartphone; “Berry Smart Health” app
Display & alertsLCD with adjustable brightness, low-battery reminder, over-limit alerts
BatteryTwo AA alkaline batteries
Dimensions124 (H) × 92 (W) × 26 (D) mm
Operating environment5°C–40°C; relative humidity 15%–80%; air pressure 860–1060 hPa
CertificationCE and FDA 510K
Warranty1 year, plus free replacement for quality issues
SKUBM1000A

Buyer decision: if your readings will mostly sit in the low 80s or below, the ±2% accuracy figure no longer describes that zone — the detection scope still reaches 30%, but treat low-range values as trends to confirm clinically, not as a diagnosis.

Neonate Portable Pulse Oximeter with Bluetooth - BM1000A  FDA-Certified

Palm-sized handheld built for home, travel and facility use.

Match the Scenario to a Specification

Instead of comparing every line of the spec sheet, start from how you will actually use the device and check the one or two numbers that matter for that scenario.

Night checks at home

Spec that decides it: adjustable LCD brightness, a low-battery reminder and over-limit alerts on a device that runs on two AA cells.

Buyer move: keep a spare pair of AA alkaline batteries beside the device so a dim screen or a battery warning never interrupts a check.

Travel and clinic bags

Spec that decides it: 124 × 92 × 26 mm housing, AA batteries and an operating range of 5°C–40°C with 15%–80% relative humidity.

Buyer move: pack it for trips inside that temperature and humidity window rather than leaving it in a hot or very cold vehicle.

One device for a mixed-age family or small clinic

Spec that decides it: the product page lists use for adults, children and neonates, with perfusion index added to SpO2 and pulse rate.

Buyer move: one handheld plus the right sensor per patient covers the household or practice; confirm sensor sizing for the smallest patients before ordering.

Several caregivers sharing results

Spec that decides it: Bluetooth transmission to a PC or smartphone, with readings stored in the “Berry Smart Health” app.

Buyer move: if grandparents, a nanny or a home-health aide all take readings, the app record removes the need to re-report numbers over the phone.

BM1000A pulse oximeter with SpO2 sensor options for neonates, infants and children

Probe choice changes with age band — the electronics do not.

Probe and Placement Fit by Age Band

The BM1000A uses the same handheld unit across age bands and changes only the SpO2 sensor. The product page lists three sensor options; exact sizing for a specific weight is confirmed with support before you order.

What to confirm before you buy
Age bandTypical placement to discussConfirm before ordering
Newborn (0–1 month)Wrapped sensor on the foot or hand, per the sensor's own placement instructionsThat the sensor you select is suited to your baby's weight — ask support for low-birth-weight guidance
Infant (1–12 months)Foot or hand wrap, kept still and shielded from room lightWhich of the three sensor options your supplier recommends for this band
Child (1–12 years)Finger placement once the child can hold still for a readingWhether a pediatric or adult-style sensor fits the finger size

Placement rule that applies at every age: a loose or partly lifted sensor reads poorly no matter how good the accuracy spec is. If readings look unstable, reseat the sensor before assuming the device is at fault.

Pediatric SpO2 monitoring with the BM1000A handheld pulse oximeter

Four Criteria That Actually Decide the Purchase

Everything else on the spec sheet is detail. These four points separate a device that works on a newborn from one that only works on an adult finger.

1

Accuracy in the low-saturation zone

The ±2% claim holds from 80% to 100%, while detection reaches down to 30%. If your concern is a baby trending low, ask how the device behaves below 80% instead of assuming the headline accuracy applies there.

2

Sensor fit for the smallest patient

Three SpO2 sensor options exist, and the right one is decided by age and weight. Probe fit is the single most common reason a pediatric reading fails.

3

Alerts and shared data

Over-limit alerts, a low-battery reminder and Bluetooth sync to the “Berry Smart Health” app matter if more than one person takes readings or if you need a timeline rather than a single number.

4

Certification and after-sales cover

CE and FDA 510K certification, a 1-year warranty and free replacement for quality issues tell you what happens if the device disappoints after month one.

BM1000A pulse oximeter with app connectivity for pediatric health tracking

Certification, Warranty and Support Path

The paperwork behind a pediatric device matters as much as the readings, because it decides what you can rely on and who answers when something goes wrong.

CE & FDA 510K Certification stated on the BM1000A product page
1-year warranty Standard cover from the date of purchase
Free replacement For quality issues, per the warranty terms
Berry Smart Health App-based storage of the readings sent over Bluetooth

Need a sensor recommendation or an order for several units? Reach the Pepultech team at sales@pepultech.com or +86 19901857963, or use the Contact Us page for warranty, wholesale and drop-ship enquiries. Full terms sit in the site's Warranty, Shipping and Return & Exchange policies.

BM1000A neonate portable pulse oximeter with Bluetooth, FDA-certified

The Shortlist: BM1000A

One handheld that covers newborn, infant, child and adult checks, provided you match the sensor to the patient.

  • SpO2 30%–100% with ±2% accuracy from 80% to 100%, plus pulse rate 25–350 bpm and perfusion index
  • Three optional SpO2 sensors so one device serves neonates through adults
  • Bluetooth sync to the “Berry Smart Health” app for shared records
  • Two AA alkaline batteries, 124 × 92 × 26 mm handheld body
  • CE and FDA 510K certified; 1-year warranty with free replacement for quality issues

Ordering for a clinic, a distributor or more than one child in the family? Ask about wholesale and drop-ship terms, or request a quote with your sensor mix and quantity.

Related Reading

Three notes to help clarify product requirements before contacting the supplier.

Tracking Baby Oxygen Trends With an App-Connected Pulse Oximeter

An app-connected pulse oximeter turns a handful of scattered spot checks into a readable timeline of a baby's oxygen saturation, pulse rate, and perfusion index.

Read article

Choosing a Certified Home Pulse Oximeter with FDA 510(K) and CE Marking

A home pulse oximeter for family use should come with more than a certification badge.

Read article

Portable Pediatric Pulse Oximeter for Travel and Night Checks

A portable pediatric pulse oximeter earns its place in a travel bag when battery access, screen light, alarm settings, and sensor fit work together in a dim room away from home.

Read article

Frequently Asked Questions

what does the bm1000a measure?

SpO2, pulse rate and perfusion index.

what is the spo2 accuracy?

±2% from 80% to 100%, within a detection scope of 30% to 100%.

what pulse rate range does it cover?

25 to 350 bpm with ±2 bpm accuracy and 1 bpm resolution.

how many sensor options are there?

Three sensors, so the probe can be matched to the age band.

how does it connect?

Bluetooth to a PC or smartphone through the Berry Smart Health app.

what decides the purchase?

The page narrows it to four criteria — probe fit by age band, accuracy range, certification and the support path.